Select your language
NTN-SNR Portal home >  Products >  NTN Industry products >  Ball and Roller Bearings >  Bearing Units, Plummer Blocks
Print

Bearing Units, Plummer Blocks

 

 Paa_ntn

Bearing Units

NTN bearings units combine a double-sealed ball bearing with various types of bearing housing. These are optimal units which are self-aligning at the spherical fitting surface of the bearing and housing. In particular, set screw type bearing units use NTN's unique set screw with a ball, and this is extremely effective for stopping loosening of the set screw, even when there is a vibrating or impact load.

(Ref. catalog "Bearing units" CAT. No. 2400/E etc.) 

 paa_ntn_corps_en_fonte

Bearing Units with Ductile Cast Iron Housing

In this series, breaking strength has been improved by about 30% over conventional gray cast iron by using ductile spherical graphite cast iron for the housing material. The outer dimensions have been designed to be as small as possible.

(Ref. catalog "Bearing Units with Ductile Cast Iron Housing" CAT. No. 3901/E etc.)

 paa_ntn_corps_acier

Bearing Units Steel Series

The steel housings provide rigidity, high load capacity and impact resistance.
Excellent impact resistance.
Greater rigidity than with previous cast steel products.

(Ref. catalog "Bearing Units Steel Series" CAT. No. 3902/E etc.)

paa_ntn_acier_inoxydable

Bearing Units Stainless Steel Series

The units combine a stainless steel housing and a stainless steel bearing with solid grease.
Excellent corrosion resistance.
Small lubricant leakage.
Low rotation torque.

(Ref. catalog "Bearing Units Stainless Series" CAT. No. 3903/E etc.) 

paa_ntn_corps_plastique

Bearing Units Plastic Series

The units combine a plastic housing and a stainless steel bearing with solid grease.
Excellent water and corrosion resistance.
Small lubricant leakage.
Low rotation torque.

(Ref. catalog "Bearing Units Plastic Series" CAT. No. 3904/E etc.)

 paliers_fonte_ntn Plummer Blocks

NTN plummer blocks are bearing boxes for self-aligning roller or ball bearings. Depending on the application, the plummer block has a built in felt seal, rubber seal or labyrinth seal as the sealing device. Each type is lubricated using grease or oil. The standard bearing box body is cast iron, but (depending on the application) may also be made of spheroidal graphite cast iron (ductile cast iron) or cast steel.

(Ref. catalog "Plummer Blocks" CAT. No. 2500/E etc.)